10
My client's oak table showed a weird haze after I applied the topcoat.
Turns out I was wiping the stain off with the grain, but applying the polyurethane across it. A guy at the supply shop in Springfield pointed it out when I described my process. Anyone else run into this with oil-based finishes?
3 comments
Log in to join the discussion
Log In3 Comments
ellis.charles3mo ago
My maple dresser did the same thing. I switched to applying everything with the grain and a second coat cleared it right up.
3
hugo501mo ago
I used to go against the grain but you're totally right about switching it up.
8