Went with the magnesium float over the fresno on that 12x14 slab in Tucson, and I'm still not sure I made the right call | Concrete Finishers - HW Forums
Went with the magnesium float over the fresno on that 12x14 slab in Tucson, and I'm still not sure I made the right call
Had a 12x14 backyard slab pour two Saturdays ago in Tucson and the homeowner wanted a smooth trowel finish, so I had to pick between my magnesium float and my fresno for the first pass. I went with the mag float for the open up and it pulled a lot of cream to the top, which meant a longer wait before I could get on it with the steel trowel. Curious what the rest of you would have grabbed for that first pass, or if I'm overthinking the whole thing.
Tbh the cream thing is kinda backwards. Magnesium floats are open grain and actually pull less cream than steel, that's the whole point of using them on the first pass. What pulled the cream up was working the surface too wet, not the float itself, especially on a Tucson pour where the top dries fast and the water sits right there. If you had hit it earlier with the mag while it was still stiff you would've had a flatter, tighter surface and less waiting before the steel trowel. You didn't mess up the float choice, you just got on it a little late.