Hot take: I thought a timing light was a waste for a $400 truck, then one $18 part ate my Saturday
I picked up a beat 1994 Ranger for $400 back in March and it ran rough, so I figured it was plugs and wires and I would be done in an hour. Three weekends later I was still chasing a miss that moved around depending on the weather and how mad the truck felt. What finally fixed it was an $18 can of carb cleaner and a cheap vacuum gauge from the parts store on Fremont, because a cracked intake gasket was sucking air the whole time. I had pulled the plugs twice, swapped the coil, cleaned the IAC, and thrown a timing light on it before I even thought to check for a vacuum leak, which took about 20 seconds once I actually did it. The real kicker is I spent $60 on parts I did not need and about 9 hours under the hood for a problem a $12 gauge would have found on day one. I used to think vacuum gauges were for guys with fancy shops, but now it lives in my top drawer next to the duct tape. What I want to know is what cheap tool do you all keep reaching for that surprised you, because I clearly need more of them in the box.
Kind of sounds like you just skipped the basic stuff and jumped straight to throwing parts at it. A vacuum gauge is like ten bucks and should be the first thing anyone checks on a rough running engine, so is this really a surprise or just a lesson in doing the easy test first?