The breaker panel at my sister's place in Cleveland has four double-taps and a fuse box still in use
Stayed at my sister's house in Cleveland last week to help her move some furniture and she asked me to look at the outlet in the spare room that kept tripping. I popped the cover off the panel in the basement and my stomach dropped. Four breakers had two wires jammed into each lug, one of them was a 20 amp breaker feeding what looked like 14 gauge wire, and there was still an old screw-in fuse box wired in line with the whole thing. The fuse box had a penny behind one of the fuses, which I have only ever heard about from old timers and never actually saw with my own eyes until then. The panel itself was a brand I did not recognize and the bus bar had rust on it from what looks like a slow leak above it. I want to help her get this cleaned up but I am not sure if this is a replace the panel job or if some of it can be saved. Has anyone dealt with the penny behind the fuse trick and did you have to redo the whole circuit or just pull it out?
What is a penny even doing in a fuse box that's still live? That alone tells you nobody has touched this thing with any care in decades. The rusty bus bar and the mystery brand would worry me more than the penny to be honest. Rust means water got in there and that panel is done, no saving it. The 20 amp breaker on 14 gauge wire is a fire waiting to happen and a penny behind a fuse means somebody kept blowing fuses and just jammed it tighter instead of finding the short. Pull the penny, sure, but that whole panel needs to come out and get replaced before she runs anything in that spare room again.